The Plover Wiki has moved!

The Plover Wiki has moved to GitHub

This wiki is only provided for archival purposes and should not be considered accurate or up to date.


From Plover Wiki
Jump to: navigation, search

For Elan Cybra, what you have to do is connect the cable, turn on the machine, and then of the six top buttons, you hold down the innermost and middle left buttons simultaneously at the same time - hold down until you hear a beep. Then, go to Plover Configure, and in TX Bolt (use NO OTHER SETTING) hit Configure. Then in Serial Port Configuration, hit Scan (should bring up COM1 - drop down menu, select COM4. Hit OK, then hit Save.